HMT VersaDrive™ 4pce Reamer Set
Keep the Job Moving when a connection hole is undersized VersaDrive reamers perform the fastest and with less kickback when adapted for use with an Impact wrench for enlarging holes in steel plate up to around 20mm thick. They can also be used in any standard 1/2" chuck or adapted for use in a slow speed magnet drills using the weldon magnet drill adapter, and is ideal for use on plate heavier than 20mm thick. VersaDrive reamers are not recommended for use with laser or plasma cut holes. Heat affected holes should be enlarged using the VersaDrive reamer with a slow speed magnet drill.
Precision 6-Flute design for smooth cut on structural steel.
Safer reaming with minimal kickback; specially hardened for impact wrench use.
High grade tool steel with ground flutes for high accuracy & long life.
GoldMax low friction Titanium coating to stop heat burn out.
High strength reinforced hexagon shank design, provides a secure hold and prevents slippage.
5010304 Set Contents:
1 x 12mm Versadrive Reamer
1 x 14mm Versadrive Reamer
1 x 18mm Versadrive Reamer
1 x 22mm Versadrive Reamer
1 x 26mm Versadrive Reamer