Pferd CC-Grind-Solid Victograin Grinding DIsc
The Pferd CC Grind Solid VICTOGRAIN are manufactured with the VICTOGRAIN triangular abrasive grain, these are identical in shape and size and their cutting edges are applied to the workpiece at the optimum angle. This means the grains perform with much less working pressure, whilst still providing the ultimate in aggressive performance for super-fast material removal. CC Grind Solid with the VICTOGRAIN is also significantly more ergonomic than conventional grinding wheels, both noise and vibration are reduced by up to 50 % and the amount of dust generated is reduce by 80 %. The VICTOGRAIN also offers greater tool life, much less heat build-up of the workpiece and a lower power output is required by the tool drive.
The very small crystals inside the triangles ensure optimal wear characteristics as sharp cutting edges are always exposed, but only the minimum amount of abrasive grain from triangle breaks off.
Although the VICTOGRAIN abrasives have a single coating of abrasive grit, they offer outstanding life which often exceeds that of conventional grinding wheels and also many flap discs.
The CC Grind Solid VICTOGRAIN produces a clearly superior surface finish, when compared to that of produced by conventional grinding discs.
For the optimum performance, use at a flat contact angle between 5 to 15 degrees and with the SFS CC-GRIND clamping flange set.
The layered structure of the glass fibre backing pad, guarantees that the CC Grind Solid VICTOGRAIN is as durable and safe to use in comparison to conventional grinding wheel.
For the best results use the face of the disc, not suitable for peripheral grinding.
Work on edges
Fine grinding in multiple steps