The Endurance bulk wire drum system offers a high productivity solution for continuous high volume welding applications.
A copper coated solid wire suitable for single pass and multipass applications.
Suitable for the welding of unalloyed and low-alloyed carbon-manganese steels.
Good mechanical properties at sub-zero temperatures down to -40°C.
Precision layer wound for superior wire feeding characteristics
Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc.
Standards:
EN/ISO-Standard - 14341-A AWS-Standard - A5.18
EN/ISO-Classification - G 42 3 C1/42 4 M21 3Si1 AWS-Classification - ER70S-6
Typical Base Materials:
S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290,
L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB,
L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N
- P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML,
S355M, S355ML, S420M, S420ML*
* Illustrative, not exhaustive list
Welding Positions:
EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG
Approximate Welding Parameters.
ø (mm) 0.80
Amps 60 – 200
Volts 18 – 24
ø (mm) 1.0
Amps 80 - 300
Volts 18 – 32
ø (mm) 1.2
Amps 120 – 380
Volts 18 – 34
Mechanical specifications (Typical)-C1
Tensile Strength (N/mm²) 540
Yield strength (N/mm²) 440
Elongation (%) 30
Impact Strength (J) 70
Test temperature -30ºC
Mechanical Properties (Typical) - M21
Tensile Strength (N/mm2) 580
Yield Strength (N/mm2) 460
Elongation (%) 26
Impact Strength (J) 90
Test Temperature -40ºC
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
Typical Chemical Composition %
C - 0.07%, Si - 0.85%, Mn - 1.45%, P - <0.025%, S - <0.025%, Cu%a - <0.35%, Cr - <0.15%, Ni - <0.15%, Mo - <0.15%, Al - <0.020%, V - <0.030%, Zr+Ti - <0.15%.