The Endurance bulk wire drum system offers a high productivity solution for continuous high volume welding applications.
A copper coated solid wire suitable for single pass and multipass applications.
Suitable for the welding of unalloyed and low-alloyed carbon-manganese steels.
Good mechanical properties at sub-zero temperatures down to -40°C.
Precision layer wound for superior wire feeding characteristics
Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc.
Standards:
EN/ISO-Standard – 14341-A AWS-Standard – A5.18
EN/ISO-Classification – G 42 3 C1/42 4 M21 3Si1 AWS-Classification – ER70S-6
Typical Base Materials:
S185, S235, S275, S355 – Grade A, B, D, AH32 to DH36 – L210, L240, L290,
L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB,
L415MB – X42, X46, X52, X60 – P235T1, P235T2, P275T1 – P275T2, P355N
– P235GH, P265GH, P295GH, P355GH – S275, S355, S420, S275M, S275ML,
S355M, S355ML, S420M, S420ML*
* Illustrative, not exhaustive list
Welding Positions:
EN ISO 6947 – PA, PB, PC, PD, PE, PF, PG
Approximate Welding Parameters.
ø (mm) 0.80
Amps 60 – 200
Volts 18 – 24
ø (mm) 1.0
Amps 80 – 300
Volts 18 – 32
ø (mm) 1.2
Amps 120 – 380
Volts 18 – 34
Mechanical specifications (Typical)-C1
Tensile Strength (N/mm²) 540
Yield strength (N/mm²) 440
Elongation (%) 30
Impact Strength (J) 70
Test temperature -30ºC
Mechanical Properties (Typical) – M21
Tensile Strength (N/mm2) 580
Yield Strength (N/mm2) 460
Elongation (%) 26
Impact Strength (J) 90
Test Temperature -40ºC
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
Typical Chemical Composition %
C – 0.07%, Si – 0.85%, Mn – 1.45%, P – <0.025%, S – <0.025%, Cu%a – <0.35%, Cr – <0.15%, Ni – <0.15%, Mo – <0.15%, Al – <0.020%, V – <0.030%, Zr+Ti – <0.15%.
